Tools and Workshop35 videos
Safety Wire Pliers
Safety wire pliers are very useful when safety wiring componets. In this hint, Brian Carpenter of Rainbow Aviation demonstrates how to use safety wire pliers and some of the features of higher quality safety wire pliers.
Safety Wire Twisters
EAA Technical Counselor and A&P/IA mechanic Dick Koehler shows the two more common safety wire pliers. One with reversible function and one without.
Using the proper tool for the application is important. EAA Technical Counselor and A&P mechanic Bob Koehler discusses the different types of common phillips screwdrivers and the importance of using the right one.
Overview of 3-D Printing
EAA SportAir workshops manager Mark Forss provides a general overview of 3-D printing systems that are available for the homebuilder.
Easy Workbench Shim
Often times the leg of a workbench needs to be shimmed to ensure the surface is flat and level. Timm Bogenhagen from te EAA staff demonstrates the use of a pronged tee nut to make this process an easy task.
Checking for Flat Workbench Top
A flat and level surface to build airplane components upon is a good initial step in the building process. Timm Bogenhagen from the EAA staff demonstrates how to use a piece of string to verify you have a flat work surface.
Bead Breaker for Tires
Dick Koehler demonstrates the use of an inexpensive tool used to break the seal between the rubber tire and wheel when changing tires.
Band Saw Tabletop
Cutting very thin material on a bandsaw can be made easier and safer by incorporating this hint. Manager of EAA SportAir Workshops program Mark Forss shows how to create a new table surface to your bandsaw.
Drill Alignment Jig
Fred Stadler demonstrates use of a simple alignment jig designed by EAA's master craftsman Bauken Noack. Especially useful to ensure precise installation of a wing's drag/anti-drag wires.
Nicopress Swaging Tool
Brian Carpenter from Rainbow Aviation demonstrates the use of the Nicopress swaging tool.
Hand Drill Guide Jig
Drilling holes perpendicular to your work piece using a hand drill can be challenging. Timm Bogenhagen of the EAA staff shows a handy wood guide jig block to make perpendicular holes easy.
Foot Activated Clamp
Clamping small pieces of metal for drilling holes can be a challenge. Brady Lane from the EAA staff shows a clever clamping method to make the job efficient and accurate.
- Load More