Crimping Butt Connectors
EAA technical counselor and A&P/IA Dick Koehler discusses how to use butt connectors and demonstrates wire splicing using a butt connector.
Labeling Electrical Wires
Labeling electrical wires is sometimes overlooked during the building process. EAA volunteer Fred Stadler shows how effective a label maker can be to mark heat shrink tubing and install on wires as a method to mark wires for later identification.
EAA technical counselor and A&P/IA Dick Koehler demonstrates the use of heat shrinkable solder sleeves and how they can conveniently be used to tie ground wires together.
Key Switch Installation
Tracy Buttles from the EAA staff demonstrates how to install a ignition key switch into an instrument panel in a way that locks it in place and prevents it from rotating within the mounting hole.
Electrical Volt-Ohm Multimeter
Dick Koehler discusses the use of a digital volt/ohm multimeter which is a useful tool for diagnosing electrical issues.
Molex Avionics Connectors
Dick Koehler demonstrates how to make a Molex connector commonly used in avionics installations. Dick is a Technical Counselor for EAA Chapter 186, A&P aircraft mechanic with Inspection Authorization (IA), and SportAir Workshop instructor.
Voltage Regulator Overview
EAA Technical Counselor and A&P/IA mechanic Dick Koehler shows the inside of a mechanical voltage regulator and discusses the component parts and how it all works to regulate voltage in an aircraft's electrical system.