Drilling Out a Rivet
When you're riveting on your aircraft there's probably going to come a time when you get a rivet that doesn't quite set the way you want it. Joe Norris, EAA's flight training manager, demonstrates the proper way to drill out an offending rivet.
In Sheet Metal
Sheet Metal Snips
Cutting sheet metal can be made easy when using the properly designed snips for the application. Tracy Buttles from the EAA staff demonstrates how to use various types of handheld sheet metal snips.
Pressure Testing Fuel Tank
Testing newly fabricated fuel tanks for leaks is always a good idea prior to flight. Tim Hoversten from the EAA staff demonstrates a simple technique to pressure test a welded aluminum fuel tank.
Fabricate Aluminum Rib Intercostal
Built up wing ribs have several component parts. In this video EAA chapter manager John Egan demonstrates how he fabricated an intercostal for his scratch built Super Cub aluminum ribs.
EAA Technical Counselor and A&P/IA mechanic Bob Koehler likes to stock longer sized rivets then cut to size when needed. He demonstrates how to cut solid structural rivets to proper length prior to being set.
Using Metal Shrinker
EAA Chapters Manager John Egan demonstrates the use of a metal shrinker. John also shows how he used a shrinker to bend the metal cap strips on the aluminum ribs he built for his scratchbuilt Super Cub.
Gun Riveting Basics
EAA Technical Counselor and A&P/IA mechanic Bob Koehler demonstrates the basics of using a 2X rivet gun and bucking bar to properly set protruding and flush head rivets.