Welding By The Numbers
Dr. Joe Maj, AirVenture volunteer in the Gas welding workshops and SportAir Workshop instructor shares his three key numbers for gas welding success. If you adopt these three key numbers, you will learn to gas weld much quicker and easier.
Fabric Covering Drain Holes
Installing holes in fabric covered airplanes is one of the last steps in the fabric covering process. Timm Bogenhagen from the EAA staff shows an easy way to do this using a round tip soldering iron.
Marking Tubing Reference Lines
Timm Bogenhagen from the EAA staff demonstrates an easy way to mark a reference line on long pieces of tubing.
Tube Coping with Angle Grinder
EAA Technical Aviation Expert Tim Hoversten demonstrates the use of an inexpensive angle grinder with a 60 grit flap disc to shape steel tubing when fitting joints for welding.
Modified Seine Knot - Alternate Method
Jasen Golden from Rainbow Aviation Services demonstrates an alternate sequence to tie the modified seine knot for rib stitching fabric covered aircraft.
Timm Bogenhagen from the EAA staff discusses using a digital infrared thermometer to increase accuracy and convenience while checking iron temperatures for shrinking fabric.
TIG Welding Accessories Overview
Charlie Becker from the EAA staff provides an overview of several accessories you might want to acquire when setting up your new TIG welding system.