Modified Seine Knot - Alternate Method
Jasen Golden from Rainbow Aviation Services demonstrates an alternate sequence to tie the modified seine knot for rib stitching fabric covered aircraft.
Joining tubes together requires shaping the tube end to get a good tight fit. Charlie Becker demonstrates a technique he learned from Paul Poberezny to fishmouth tubing for good tight fits.
Fabric Covering Drain Holes
Installing holes in fabric covered airplanes is one of the last steps in the fabric covering process. Timm Bogenhagen from the EAA staff shows an easy way to do this using a round tip soldering iron.
TIG Welding Tips
Charlie Becker from the EAA staff provides several tips and tricks to obtain the best possible TIG welds.
Cutting Dacron sailcloth
Brian Carpenter from Rainbow Aviation Services shows how to cut dacron sailcloth by modifying a soldering iron into a hot knife.
Tube Coping with Angle Grinder
EAA Technical Aviation Expert Tim Hoversten demonstrates the use of an inexpensive angle grinder with a 60 grit flap disc to shape steel tubing when fitting joints for welding.
TIG Welding Accessories Overview
Charlie Becker from the EAA staff provides an overview of several accessories you might want to acquire when setting up your new TIG welding system.