TIG Welding Tips
Charlie Becker from the EAA staff provides several tips and tricks to obtain the best possible TIG welds.
Joining tubes together requires shaping the tube end to get a good tight fit. Charlie Becker demonstrates a technique he learned from Paul Poberezny to fishmouth tubing for good tight fits.
Timm Bogenhagen from the EAA staff discusses using a digital infrared thermometer to increase accuracy and convenience while checking iron temperatures for shrinking fabric.
Tube Coping with Angle Grinder
EAA Technical Aviation Expert Tim Hoversten demonstrates the use of an inexpensive angle grinder with a 60 grit flap disc to shape steel tubing when fitting joints for welding.
Cutting Dacron sailcloth
Brian Carpenter from Rainbow Aviation Services shows how to cut dacron sailcloth by modifying a soldering iron into a hot knife.
Marking Tubing Reference Lines
Timm Bogenhagen from the EAA staff demonstrates an easy way to mark a reference line on long pieces of tubing.
Modified Seine Knot - Alternate Method
Jasen Golden from Rainbow Aviation Services demonstrates an alternate sequence to tie the modified seine knot for rib stitching fabric covered aircraft.